Setting up the PlayStation2 Network Adaptor

MONSTER ISP does not provide support for console gaming, and our customer care specialists are unable to provide assistance for gaming issues. This information is provided as a convenience and may serve as a general guideline only.

To setup the PlayStation®2 on the MONSTER ISP network you must first install the network adaptor according to the instructions found in the installation guide or on the PlayStation2 Network Adaptor Web site.  Once you have installed the network adaptor you are ready to begin the ISP setup process.

1. Power up the PlayStation 2 and load the Network Adaptor Startup Disc
2. Once it has loaded, Press X to enter the ISP SETUP
   
    
   

   
    

3. The ISP SETUP will begin to load
   
    
   

   
    

4. Once the setup process has loaded press X to continue
   
    
   

   
    

5. Your PlayStation will search for the network adaptor
   
    
   

   
    

6. After the network adaptor has been found, press X to continue
   
    
   

   
    

7. Press X again to continue
   
    
   

   
    

8. Wait while the data is accessed
   
    
   

   
    

9. Select NEW and then press X to continue
   
    
   

   
    

10. Type a name for you ISP setting.  For our example we have chosen MONSTER ISP, but this can be any name you would like to associate with this connection.
    
     
    

    
     

11. When asked is you currently subscribe to an ISP service, select YES and press X to continue
    
     
    

    
     

12. For connection type, choose DIAL-UP CONNECTION [MODEM] and press X to continue
    
     
    

    
     

    CREATING A NETWORK CONFIGURATION
     

    SETTING UP A NETWORK CONFIGURATION USING A DIAL-UP CONNECTION:
    1. In order to set up a network configuration for the Network Adaptor you will need to know specific information about your Internet Service Provider before proceeding. You will need to know:

    • The name of your Internet Service Provider = MONSTER ISP

    • Your login ID. = vodusername@network.net

    • Your password = your password

    • Your primary dial-up number =  your local access number

    2. Using the on-screen keyboard, enter a name for your new network configuration and press the X button. This name should represent where or how you will use this connection (i.e. home, office, modem, etc…)
    3. You will be asked whether you subscribe to an Internet Service Provider. Select YES and press the X button if you already have a provider, select NO and press the X button if you do not.
    4. On the next screen, highlight Dial-up Connection (Modem) and press the X button.
    5. Read the notices on the following screens and press the X button to proceed.
    6. Ignore the list of ISPs and highlight OTHER and press X.

     

13. Wait while your network connection is tested
    
     
    

    
     

14. Once the network connection test is successful press X to save the configuration to the memory card
    
     
    

    
     

15. The network configuration will now be saved to the memory card.  DO NOT REMOVE THE NETWORK CARD WHILE THIS INFORMATION IS BEING SAVED.
    
     
    

    
     

16. Your PlayStation should now be configured to connect to the Internet and you should now be able to start playing online, press X to return to the main menu.
    
     
    

    
     

17. To test out your connection you can choose DEMOS and press X to continue
    
     
    

    
     

18. From there follow the instructions on screen to play an online game demo