-
600 An
operation is pending.
-
601 An
invalid port handle was detected.
-
602 The
specified port is already open.
-
603 The
caller's buffer is too small.
-
604
Incorrect information was specified.
-
605 The
port information cannot be set.
-
606 The
specified port is not connected.
-
607 An
invalid event is detected.
-
608 A
device was specified that does not exist.
-
609 The
device type was specified that does not exist.
-
610 An
invalid buffer was specified.
-
611 A
route was specified that is not available.
-
612 A
route was specified that is not allocated.
-
613 An
invalid compression was specified.
-
614
There were insufficient buffers available.
-
615 The
specified port was not found.
-
616 An
asynchronous request is pending.
-
617 The
modem is already disconnecting.
-
618 The
specified port is not open.
-
619 The
specified port is not connected.
-
620 No endpoints could be determined.
-
621 The system could not open the phonebook.
-
622 The system could not load the phonebook.
-
623 The system could not find the phonebook entry
for this connection.
-
624 The system could not update the phonebook file.
-
625 The system found invalid information in the
phonebook.
-
626 A string could not be loaded.
-
627 A key could not be found.
-
628 The
connection was closed.
-
629 The
connection was closed by the remote computer.
-
630 The
modem was disconnected due to hardware failure.
-
631 The
user disconnected the modem.
-
632 An incorrect structure size was detected.
-
633 The modem is already in use or is not configured
for dialing out.
-
634 Your computer could not be registered on the
remote network.
-
635
There was an unknown error.
-
636 The device attached to the port is not the one
expected.
-
637 A string was detected that could not be
converted.
-
638 The request has timed out.
-
639 No asynchronous net is available.
-
640 A
error has occurred involving NetBIOS.
-
641 The
server cannot allocate NetBIOS resources needed to support the
client.
-
642 One
of your computer's NetBIOS names is already registered on the remote
network.
-
643 A network adapter at the server failed.
-
644 You will not receive network message popups.
-
645
There was an internal authentication error.
-
646 The account is not permitted to log on at this
time of day.
-
647 The account is disabled.
-
648 The password for this account has expired.
-
649 The account does not have permission to dial in.
-
650 The
remote access server is not responding.
-
651
The modem has reported an error.
-
652
There was an unrecognized response from the modem.
-
653 A macro required by the modem was not found in
the device .INF file section.
-
654 A command or response in the device .INF file
section refers to an undefined macro.
-
655 The [MESSAGE] macro was not found in the device
.INF file section.
-
656 The [DEFAULTOFF] macro in the device .INF file
section contains an undefined macro.
-
657 The
device .INF file could not be opened.
-
658 The
device name in the device .INF or media .INI file is too long.
-
659 The media .INI file refers to an unknown device
name.
-
660 The
device .INF file contains no responses for the command.
-
661 The
device .INF file is missing a command.
-
662 there was an attempt to set a macro not listed
in the device .INF file section.
-
663 The
media .INI file refers to an unknown device type.
-
664 The
system has run out of memory.
-
665 The modem is not properly configured.
-
666 The
modem is not functioning.
-
667 The
system was unable to read the media .INI file.
-
668 The
connection was terminated.
-
669 The usage parameter in the media .INI file is
invalid.
-
670 The system was unable to read the section name
from the media .INI file.
-
671 The system was unable to read the device type
from the media .INI file.
-
672 The system was unable to read the device name
from the media .INI file.
-
673 The system was unable to read the usage from the
media .INI file.
-
674 The system was unable to read the maximum
connection BPS rate from the media .INI file.
-
675 The system was unable to read the maximum
carrier connection speed from the media .INI file.
-
676 The
phone line is busy.
-
677 A
person answered instead of a modem.
-
678
There was no answer.
-
679 The
system could not detect the carrier.
-
680
There was no dial tone.
-
681 The
modem reported a general error.
-
691
Access was denied because the user name and/or password was invalid
on the domain.
-
692
There was a hardware failure in the modem.
-
695 The state machines are not started.
-
696 The state machines are already started.
-
697 The response looping did not complete.
-
699 The
modem response caused a buffer overflow.
-
700 The
expanded command in the device .INF file is too long.
-
701 The
modem moved to a connection speed not supported by the COM driver.
-
703 The connection needs information from you, but
the application does not allow user interaction.
-
704 The callback number is invalid.
-
705 The authorization state is invalid.
-
707 There was an error related to the X.25 protocol.
-
708 The account has expired.
-
709 There was an error changing the password on the
domain. The password might have been too short or might have matched
a previously used password.
-
710
Serial overrun errors were detected while communicating with the
modem.
-
711 The Remote Access Service Manager could not
start. Additional information is provided in the event log.
-
712 The
two-way port is initializing. Wait a few seconds and redial.
-
713 No
active ISDN lines are available.
-
714 No
ISDN channels are available to make the call.
-
715 Too
many errors occurred because of poor phone line quality.
-
716 The remote access service IP configuration is
unusable.
-
717 No
IP addresses are available in the static pool of remote access
service IP addresses.
-
718 The
connection timed out waiting for a valid response from the remote
computer.
-
719 The
connection was terminated by the remote computer.
-
720 The
connection attempt failed because your computer and the remote
computer could not agree on PPP control protocols.
-
721 The
remote computer is not responding.
-
722
Invalid data was received from the remote computer. This data was
ignored.
-
723 The
phone number, including prefix and suffix, is too long.
-
726 The
IPX protocol cannot be used for dial-out on more than one modem at a
time.
-
728 The system cannot find an IP adapter.
-
729
SLIP cannot be used unless the IP protocol is installed.
-
731 The
protocol is not configured.
-
732
Your computer and the remote computer could not agree on PPP control
protocols.
-
733 Your computer and the remote computer could not
agree on PPP control protocols.
-
734 The PPP link control protocol was terminated.
-
735 The
requested address was rejected by the server.
-
736 The
remote computer terminated the control protocol.
-
737
Loopback detected.
-
738 The server did not assign an address.
-
739 The authentication protocol required by the
remote server cannot use the stored password. Redial, entering the
password explicitly.
-
740 An invalid dialing rule was detected.
-
741 The
local computer does not support the required data encryption type.
-
742 The
remote computer does not support the required data encryption type.
-
743 The
remote server requires data encryption.
-
751 The callback number contains an invalid
character. Only the following characters are allowed: 0 to 9, T, P,
W, (,), -, @, and space.
-
752 A
syntax error was encountered while processing a script.
-
753 The connection could not be disconnected because
it was created by the multi-protocol router.
-
754 The system could not find the multi-link bundle.
-
755 The system cannot perform automated dial because
this entry has a custom dialer specified.
-
756 This connection is already being dialed.
-
757 Remote access services could not be started
automatically. Additional information is provided in the event log.
-
758 Internet connection sharing is already enabled
on the connection.
-
760 An error occurred while routing capabilities
were being enabled.
-
761 An error occurred while Internet connection
sharing was being enabled for the connection.
-
763 Internet connection sharing cannot be enabled.
There are two or more LAN connections in addition to the connection
to be shared.
-
764 No smart card reader is installed.
-
765 Internet connection sharing cannot be enabled. A
LAN connection is already configured with the IP address required
for automatic IP addressing.
-
766 The system could not find any certificate.
-
767 Internet connection sharing cannot be enabled.
The LAN connection selected on the private network has more than one
IP address configured. Reconfigure the LAN connection with a single
IP address before enabling Internet connection sharing.
-
768 The connection attempt failed because of failure
to encrypt data.
-
769 The specified destination is not reachable.
-
770 The remote machine rejected the connection
attempt.
-
771 The connection attempt failed because the
network is busy.
-
772 The remote computer's network hardware is
incompatible with the type of call requested.
-
773 The connection attempt failed because the
destination number has changed.
-
774 The connection attempt failed because of a
temporary failure. Try connecting again.
-
775 The call was blocked by the remote computer.
-
776 The call could not be connected because the
destination has invoked the Do Not Disturb feature.
-
777 The connection attempt failed because the modem
on the remote computer is out of order.
-
778 It was not possible to verify the identity of
the server.
-
779 To dial out using this connection, you must use
a smart card.
-
780 An attempted function is not valid for this
connection.
-
781 The encryption attempt failed because no valid
certificate was found.